Setting Sewing Attributes - Brother PS-300B Instruction Manual

To double the maximum distance for this command to respond to the specified target,
check the x 2 check box.
3. Click the OK button to apply the specified setting.
NOTE: If you have checked two or more check boxes, Gridline is given top priority.
3-3-5. Setting sewing attributes (View-Property, ):
You need to set sewing attributes to design element(s). Use the Property dialog box to set or
change sewing attributes.
When you create a design element successively, the previously set sewing attributes will be
automatically applied to it.
To set or change sewing attributes:
NOTE: If you want to change sewing attributes for a design element, first select it, and then follow the
procedure below.
1. Do one of the following:
On the View drop-down menu, click Property.
Click the Property icon
Right-click to display the context menu, and then click Property.
The Property dialog box appears.
2. Make setting changes in any of the items in the Property dialog box.
The details of the items are described below.
3. Click the Apply button to apply the specified settings.
in the toolbar.
118/164