Download  Print this page

Stitch Settings Screen; Specifying Individual Stitch Settings - Brother 882-W80 Operation Manual

Hide thumbs

Advertisement

STITCH SETTINGS SCREEN

STITCH SETTINGS SCREEN
Before creating the embroidery pattern, specify the stitch
settings. Lines of the design are embroidered with various
stitches and regions are embroidered with fill stitches or
stippling stitches. Stitching of the regions was already
selected in "Drawing Regions" on page 89, so specify
values of detailed settings.
After specifying the settings, press
embroidery pattern.

Specifying Individual Stitch Settings

Select a pattern in the stitch settings screen to specify its
line and region stitch settings. If multiple patterns are
selected, the settings are applied to those patterns.
■ Line Settings
2
1 Shows the stitch type and color for the selected line.
2 Shows the stitch settings for the selected line.
Line stitch settings
Select the type of stitching you want applied to your line
art, from zigzag stitch (
stitch (
), candlewicking stitch (
(
).
Zigzag stitch
Zigzag width Specifies the width of the stitch.
Specifies the density of the stitch.
Density
Running stitch
* Both includes an under sewing.
Specifies the length of the stitch.
Run pitch
92
to create the
1
), running stitch (
) or chain stitch
/Triple stitch
Candlewicking Stitch
Size
Spacing
Chain stitch
Size
Repetition
■ Region Settings
2
1 Shows the stitch type and color for the selected region.
2 Shows the stitch settings for the selected region.
Fill stitch settings
Direction
Density
Pull
compensation
), triple
Under
sewing
Stippling stitch settings
Run pitch
Spacing
Distance
Decorative fill stitch settings
Size
Direction
Outline
Increases/reduces the size of the stitch.
Specifies the spacing of the stitch.
Increases/reduces the size of the stitch.
Sets repeated embroidering at the same
part.
1
Specifies the embroidering direction. Select
to change to the desired direction of
fill stitch.
Specifies the stitch density of fill stitch.
Specifies to correct the shrinkage of the
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
Select if you need or do not need the under
sewing for the stabilized fabric.
Specifies the length of a stitch of the
stippling stitch.
Specifies the spacing between the stitches
when embroidering the stippling stitch.
Specifies the offset from the pattern outline.
Increases/reduces the size of the pattern.
Specifies the rotation angle of the pattern.
Select whether [ON] or [OFF] the outline is
also converted to embroidery data. If [ON] is
selected, the number of thread jumps can be
reduced.

Advertisement

Table of Contents

   Related Manuals for Brother 882-W80

This manual is also suitable for:

882-w82

Comments to this Manuals

Symbols: 0
Latest comments: