Default Settings - Brother BE-0901E-AC-PC Instruction Manual

Chapter 6 Embroidering

Default Settings

Resets changes of the machine setting to the default.
! Items for setting and initialization are as follows:
Speed Range
Hoop Feed Position
Embroidering Area
Thread Trimming
Thread Breakage Sensor
Automatic Step Back
Thread Breakage
Sensor Sensitivity
Automatic Feed Hoop
Return to the start point
Mending
Adjustment
Main shaft speed up setting
Hoop feed during temporary
stop
Reducing speed in a small
pitch
Thin / Thick material
Area Trace
6-42
Automatically selects the value suitable for the hoop type.
Returns to the machine home position.
Sets the size each for the selected hoop.
Inching motion
Thread removal feed length
Thread remaining amount
All sensors are on.
Sensitivity
0
Not affected by the thread breakage sensor sensitivity
No
Yes
Automatically rest breakage error
0.0 mm for X direction
0.0 mm for Y direction
Activating speed up of driving shaft
No
No
Thin
Feed speed
Jog moving power up
"4 corner" is selected.
BE-0901E-AC-PC• BE-1201B-AC-PC
Yes
15 mm (0.6 inch)
4
10
No
No
1
No