Download  Print this page

Stitch Settings Screen; Specifying Individual Stitch Settings; Line Settings; Region Settings - Brother 884-T13 Operation Manual

Hide thumbs

Advertisement

STITCH SETTINGS SCREEN

STITCH SETTINGS SCREEN
Before creating the embroidery pattern, specify the stitch settings. Lines of the design are sewn with
various stitches and areas are sewn with fill stitches or stippling stitches. Stitching of the areas was already
selected in "Drawing Regions" on page 10, so specify values of detailed settings.
After specifying the settings, press
If the design data is saved, the settings can be changed after a trial embroidering.
Specifying individual stitch
settings
Select a pattern in the stitch settings screen to
specify its line and region stitch settings. If multiple
patterns are selected, the settings are applied to
those patterns.

■ Line settings

a Shows the stitch type and color for the selected
line.
b Shows the stitch settings for the selected line.
Line sew stitch settings
Select the type of stitching you want applied to your
line art, from zigzag stitch (
(
), triple stitch (
or chain stitch
Zigzag stitch
Zigzag width Specifies the width of the zigzag stitches
used to sew the lines of the design.
Specifies the density of the zigzag stitches
Density
used to sew the lines of the design.
Running stitch
* Both includes an under sewing.
Specifies the length of the straight stitch of
Run pitch
the design.
15
to create the embroidery pattern.
a
b
), running stitch
), candlewicking stitch
.
/Triple stitch
Candlewicking Stitch
Increases/reduces the size of the pattern.
Size
Specifies the spacing of the candlewicking
Spacing
stitch.
Chain stitch
Increases/reduces the size of the pattern.
Size
Repetition
Sets repeated sewing at the same part.

■ Region settings

a Shows the stitch type and color for the selected
region.
b Shows the stitch settings for the selected region.
Fill stitch settings
Specifies the sewing direction. Select
Direction
"Manual" to change to the desired direction
of fill stitch.
Specifies the stitch density of fill stitch.
Density
Specifies to correct the shrinkage of the
Pull
pattern by slightly shortening or lengthening
compensation
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
Select if you need or do not need the under
Under
sewing for the stabilized fabric.
sewing
a
b

Advertisement

Table of Contents

   Also See for Brother 884-T13

   Related Manuals for Brother 884-T13

Comments to this Manuals

Symbols: 0
Latest comments: