Table of Contents
Advertisement
Figure 27 Set the terminal emulation parameters
Connecting the power adapter
The router's power adapter converts AC power to DC power, as follows:
•
AC rated voltage range: 100 VAC to 240 VAC, 50 Hz to 60 Hz
DC Rated voltage: 12 VDC
•
To connect the power adapter, as shown in
1.
Make sure the router is properly grounded. For more information, see
2.
Using the adapter's AC power cord, connect the power adapter to an AC power source.
3.
Connect the DC power cord connector on the power adapter to the DC power receptacle on
the router's rear panel.
Figure
28:
20
Grounding the
router.
Advertisement
Table of Contents
