Figure 21 Setting the terminal emulation parameters
Connecting the power adapter
The router's power adapter converts AC power to DC power, as follows:
AC rated voltage range: 100 VAC to 240 VAC @ 50 Hz to 60 Hz
•
DC Rated voltage: 12 VDC
•
To connect the power adapter, as shown in
Make sure the router is properly grounded. For more information, see "Grounding the
1.
Using the adapter's AC power cord, connect the power adapter to an AC power source.
2.
Connect the DC power cord connector on the power adapter to the DC power receptacle on
3.
the router's panel.
Figure
22:
21
router."