Entering System View From User View; Returning To The Upper-Level View From Any View; Returning To User View From Any Other View - HP MSR Series Configuration Manual

Figure 3 CLI view hierarchy

Entering system view from user view

Task
Enter system view from user view.

Returning to the upper-level view from any view

Task
Return to the upper-level view from any view.
Executing the quit command in user view terminates your connection to the device.
In public key code view, use the public-key-code end command to return to the upper-level view (public
key view). In public key view, use the peer-public-key end command to return to system view.

Returning to user view from any other view

You can return directly to user view from any other view by using the return command or pressing Ctrl+Z,
instead of using the quit command multiple times.
To return to user view from any other view:
Task
Return to user view.
Command
system-view
Command
quit
Command
return
3