Intel SE7501CW2 - E7501 DUAL PGA604 XEON 533MHZ Product Manual page 28

Table 11. Advanced Menu (continued)
Feature
Boot-time Diagnostic
Screen
Reset Configuration Data
Large Disk Access Mode
PS/2 Mouse
Summary Screen
Legacy USB Support
Hyper-Threading
QuickBoot Mode
28
Choices Description
Enabled Enables or disables the boot-time diagnostic screen.
Disabled Disabled will display the splash screen over the diagnostic
(default) screen. This splash screen can be changed to show an
OEM-based logo.
No (default) Specifies if the extended server configuration data will be
reset during the next boot.
Yes
Yes clears the extended server configuration data during
the next boot. The system automatically resets this field to
No during the next boot.
*
Other UNIX
option be set to Other. If you install an operating system
DOS (default)
and the hard drive fails to install, change this setting and try
again. Different operating systems require different
representations of drive geometries.
Disabled Configures the PS/2 mouse.
Enabled Disabled prevents any installed PS/2 mouse from
functioning but frees up IRQ 12.
Auto Detect
(default) Enabled forces the PS/2 mouse port to be enabled even if
a mouse is not present.
Auto Detect will enable the PS/2 mouse only if one is
present.
Disabled Enables or disables the boot-time hardware/BIOS summary
screen.
Enabled
(default)
Disabled Enables support for legacy USB. It may be necessary to
set this option to Disable to install NetWare 6.0 SP1.
Enabled
(default)
Disabled Allows Intel Xeon processors to run in hyperthreading
mode. Enabling this setting will improve throughput
Enabled
significantly on certain applications.
(default)
Disabled Allows the system to skip the memory test while booting.
(default) This decreases the time needed to boot the system.
Enabled
*
, NetWare , and other operating systems require this
Intel Server Board SE7501CW2 Product Guide