Table of Contents
Advertisement
Console Redirection Submenu
To access this submenu, select Advanced on the menu bar at the top of the screen and then Console
Redirection.
Main
Advanced
I/O Device Configuration
On Board Device
PCI Configuration
Server Menu
Console Redirection
DMI Event Logging
Hardware Monitor
Table 18 lists the options available through the Console Redirection submenu. This submenu
provides additional options to configure the console.
Table 18.
Console Redirection Submenu
Feature
COM Port Address
Baud Rate
Console Type
Flow Control
Console Connection
Continue C.R. after
POST
Server Board Installation
Security
Power
Choices
Description
Disabled
When enabled, console redirection uses the I/O port specified.
All keyboard/mouse and video will be directed to this port. This
(default)
setting is for use only under DOS in text mode.
On-board
COM A
On-board
COM B
300
When console redirection is enabled, specifies the baud rate to
be used.
1200
2400
9600
19.2K
(default)
38.4K
57.6K
115.2K
PC ANSI
Enables the specified console type.
(default)
PC ANSI is color, 7-bit data.
VT100
VT100 is monochrome, 7-bit data.
None
None disallows flow control.
XON/XOFF
XON/XOFF is software-based asynchronous flow control.
CTS/RTS
CTS/RTS is hardware-based flow control.
When EMP is sharing the COM port as console redirection, the
(default)
flow control must be set to CTS/RTS.
Direct
Indicates whether the console is connected directly to the
system or whether a modem is used.
(default)
Via modem
Off
Enables console redirection (C.R.) after the operating system
has been loaded. If on, the system needs 4 KB of EBDA
(default)
(Extended BIOS Data Area) memory space.
On
Boot
System
Exit
35
Hide quick links:
Advertisement
Table of Contents
