Changing The Bios Language; Hardware Monitoring; Table 26. Monitored Headers And Sensors - Intel SE7501CW2 - E7501 DUAL PGA604 XEON 533MHZ Product Manual

Changing the BIOS Language

You can use the BIOS upgrade utility to change the language the BIOS uses for messages and the
Setup program. Use a bootable diskette containing the Intel flash utility and language files.
1. Boot the computer with the bootable diskette in drive A. The BIOS upgrade utility screen
appears.
2. Select Update Flash Memory From a File.
3. Select Update Language Set. Press <Enter>.
4. Select drive A and use the arrow keys to select the correct
5. When the utility asks for confirmation that you want to flash the new language into memory,
select Continue with Programming. Press <Enter>.
6. When the utility displays the message upgrade is complete, remove the diskette. Press
<Enter>.
7. The computer will reboot and the changes will take effect.

Hardware Monitoring

The Server Board SE7501CW2 has an integrated Winbond Heceta
responsible for hardware monitoring. Together, the Winbond Heceta chip and LANDesk
Manager (LDCM) 6.3 software provide basic server hardware monitoring that alerts a system
administrator if a hardware problem occurs on an Intel Server Board SE7501CW2–based system.
The LANDesk Client Manager software is for use with Windows 2000 Server and Windows 2000
Advanced Server operating systems. Other operating systems supported by the Server Board
SE7501CW2 such as Windows XP, NetWare 6.0, or Red Hat
the LANDesk Client Manager software. Table 26 lists the monitored headers and sensors on the
Server Board SE7501CW2.
Table 26. Monitored Headers and Sensors
Item
Sensor Type
CPU1/2
Voltage
1.8 V
VCC3
VCC
+12 V
2.5 V
Vbat
5 VSB
CPU1_FAN
Fan Speed
CPU2_FAN
CHASSIS_FAN
CPU2
Temperature
CPU1
CHASSIS
46
lng file. Press <Enter>.
.
*
836327HF chip that is
* *
Linux will not be monitored with
Description
Monitors processor voltage (one CPU power plane)
Chipset
Monitors VCC3
Monitors VCC
Monitors +12 V
Monitors 2.5 V (for DIMM)
Battery pin voltage
Monitors 5 VSB (5 V stand-by)
Monitors primary processor fan speed
Monitors secondary processor fan speed
Monitors chassis fan speed through chassis fan header
3 only. (Total four chassis fans available)
Monitors primary processor temperature
Monitors secondary processor temperature
Monitors chassis ambient temperature
Intel Server Board SE7501CW2 Product Guide
*
Client