Boot Menu; Table 23. Boot Menu - Intel SE7501CW2 - E7501 DUAL PGA604 XEON 533MHZ Product Manual

Boot Menu

To access this menu, select Boot on the menu bar at the top of the screen.
Main Advanced
Table 23 lists the options available on the Boot menu. This menu allows you to set the boot priority
of devices installed in the system. Use the following key combinations to navigate between or view
the devices and change the boot priority:
<Enter> expands or collapses devices that have a "+" or "-" in front of them.
<Ctrl+Enter> expands all devices.
<Shift+1> enables or disables devices. Disabled devices appear with a "!" in front of them.
<+> and <-> moves the device up or down in the list.
<n> may move the removable device between the hard drive or removable disk.
<d> removes a device that is not installed.
Table 23. Boot Menu
Boot Priority
st
1 Boot Device
nd
2 Boot Device
rd
3 Boot Device
th
4 Boot Device
40
Security Power
Device Description
Removable Specifies the boot sequence according to the device type. The
Devices
computer will attempt to boot from up to four devices as
specified here. Only one of the devices can be an IDE hard
Hard Drive
disk drive.
CD-ROM
The default settings for the first through fourth boot devices are,
Drive
respectively:
Network
Removable Devices: Attempts to boot from the diskette
Boot
drive or a removable device, such as the floppy.
Hard Drive: Attempts to boot from a hard drive device.
CD-ROM Drive: Attempts to boot from a CD-ROM drive
containing bootable media. This entry appears if there is a
bootable CD-ROM that is in a BIOS Boot Specification
(BBS)–compliant SCSI CD-ROM.
Network Boot: If the network card ROM contains the string
$PnP, it uses the correct BBS and the device will appear
under the Boot menu as an independent device. Otherwise,
it will appear under the Boot/Network Boot submenu.
Boot System
Intel Server Board SE7501CW2 Product Guide
Exit