Wakeup Events; Security; Table 4. Security Operation Summary - Intel SE7501CW2 - E7501 DUAL PGA604 XEON 533MHZ Product Manual

AC Link Mode
The AC link mode allows the system to monitor its AC input power so that if AC input power is
lost and then restored, the system returns to one of the following preselected settings:
Last State (Factory Default Setting)
Stay Off
The AC link mode settings can be changed by running the BIOS Setup Utility.

Wakeup Events

The SE7501CW2 system supports the following wakeup events.
Wake on LAN
Wake on LAN allows system power to be activated through the network. If the system is in the S4
state, it can be turned on remotely by sending a specific packet to the remote system. The system
contains a configuration option that allows the on-board NICs to be enabled to wake the system
from a S4 or S5 sleep state, even if the operating system disabled.
Wake on Ring
Wake on Ring allows system power to be activated through the serial ports when this option is
enabled in Setup. If the system is in the S4 state, it can be turned on remotely by the Ring Indicate
RI signals from the serial ports.

Security

The Server Board SE7501CW2 BIOS provides the ability to secure itself. Table 4 summarizes the
security options available in the BIOS.
Table 4. Security Operation Summary
Entry Method/
Mode Event
User Power On/Reset
Password
on boot
(AT style)
18
Entry
Criteria Behavior
User System halts for
password User Password
set and before booting. The
password on system is not in
boot enabled secure mode.
Except for the
password, no mouse
or keyboard input is
accepted.
Exit Criteria
User
password
followed by
[Enter]
Intel Server Board SE7501CW2 Product Guide
After Exit
Power and Reset
switches are
enabled.
Keyboard and
mouse inputs are
accepted. The
system boots
normally. Boot
sequence is
determined by
setup options.