Console Redirection Submenu - Intel SE7500CW2 Product Manual

Console Redirection Submenu

To access this submenu, select Advanced on the menu bar at the top of the screen and then Console
Redirection.
Main
Advanced
I/O Device Configuration
On Board Device
PCI Configuration
Server Menu
Console Redirection
Event Logging
Hardware Monitor
Table 15 lists the options available through the Console Redirection submenu. This submenu
provides additional options to configure the console.
Table 15. Console Redirection Submenu
Feature
COM Port Address
Baud Rate
Console Type
Flow Control
Console Connection
Continue C.R. after
POST
34
Security Power
Choices Description
• Disabled
When enabled, console redirection uses the I/O port specified.
(default)
All keyboard/mouse and video will be directed to this port. This
• On-board
setting is designed to be used only under DOS in text mode.
COM A
• On-board
COM B
• 300
When console redirection is enabled, specifies the baud rate to
• 1200
be used.
• 2400
• 9600
• 19.2k
(default)
• 38.4k
• 57.6K
• 115.2k
• PC ANSI
Enables the specified console type.
(default)
• VT100
• None
None disallows flow control.
• XON/XOFF
XON/XOFF is software-based asynchronous flow control.
• CTS/RTS
CTS/RTS is hardware-based flow control.
(default)
When EMP is sharing the COM port as console redirection, the
flow control must be set to CTS/RTS.
• Direct
Indicates whether the console is connected directly to the
(default)
system or whether a modem is used.
• Via modem
• Off
Enables console redirection (C.R.) after the operating system
(default)
has been loaded.
• On
Boot System
Intel Server Board SE7500CW2 Product Guide
Exit