Chapter 6 Addendum
CAUTION
To prevent damage to cables, or a disruption in service due to a disconnection of cables, use
caution when sliding the chassis into the rack.
12. If chassis work is complete, slide the NetServer chassis back into the rack. See Figure 6-23.
13. Reconnect any cables you may have removed, including cables to the accessory boards, before continuing.
14. Insert the screws and use a T-25 driver to secure the flanges to the front columns of the rack.
15. Re-install the bezel to the front of the NetServer.
16. Return the NetServer to normal operation.
Press in the release latch on
each slide and push the
server into the rack
Figure 6-23. Siding the NetServer Back into the Rack
HP NetServer LXr 8000 Installation Guide
Flanges
29