HP D7171A - NetServer - LPr Manual page 10

Pci card installation and replacement and hot-plug operations

Hide thumbs Also See for D7171A - NetServer - LPr:

Chapter 6 Addendum

9. Determine which covers to remove from the NetServer.

If installing a board in slots P7-P10 only, lift off the hot-plug access panel covering these slots.

See Figure 6-4.

If installing a board in slots P1-P6, you must remove the Top Cover and the Shield. See Figure 6-4.

Top Cover

Figure 6-4. NetServer LXr 8000 Covers

HP NetServer LXr 8000 Installation Guide

Hot Plug

Access Panel

Shield

Table of Contents