HP D7171A - NetServer - LPr Manual page 22

Chapter 6 Addendum
6. Verify power to the desired PCI slot is turned off, by checking the two LEDs associated with the desired
PCI slot.
The green Power LED must be OFF. See Figure 6-16 and Table 6-1.
The following table decodes the LEDs for each PCI slot:
Table 6-1. PCI LED Power Code
Green
LED
On
On
Off
Off
20
PCI Hot-Plug
LEDs
Figure 6-16. Hot-Plug Slots and LEDs
Amber
LED Indicates This Status
Off Power to the slot is on, and the slot is operating
normally. Do not remove the board from the slot.
On Power to the slot is on, but the slot needs attention. See
Help files for choices. Do not remove the board from
the slot.
On Power to the slot is off, and the slot needs attention.
You can remove the board from this slot.
Off Power to the slot is off. You can safely remove the
board from this slot.
HP NetServer LXr 8000 Installation Guide