HP D7171A - NetServer - LPr Manual page 17

Chapter 6 Addendum
Powering Down the PCI Slot
1. Select the desired PCI slot (slot P9) to change by pointing to it with the mouse cursor. See Figure 6-11.
2. Left-click the desired slot (slot P9) with the mouse.
CAUTION Turning off power to any slot will render all devices or services associated with the board in the
unavailable while power is turned off to the slot.
3. Click the Power button in the upper right of the menu. See Figure 6-11.
A pop-up prompt appears requesting conformation of this action. See Figure 6-12.
You may also right-click the slot (slot P9) and the pop-up prompt will appear.
Figure 6-11. PCI Hot-Plug Utility – Turn Power Off
HP NetServer LXr 8000 Installation Guide
15