Download Print this page

HP D7171A - NetServer - LPr Manual page 24

Pci card installation and replacement and hot-plug operations
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

Chapter 6 Addendum
13. Grasp the edge of the PCI board firmly and pull upward. See Figure 6-17.
Try to pull the board straight up without wiggling it side to side along the length of the board.
14. Refer to the section in this chapter, "Replacing a PCI Hot-Plug Board," to install a new or replacement but
identical PCI Hot-Plug board in the PCI Hot-Plug slot.
22
Figure 6-17. Removing PCI Boards
HP NetServer LXr 8000 Installation Guide
Accessory
Board
Bracket

Advertisement

loading