Setting Up The Hp Netserver; Setup Steps; Preparations - HP D6030A - NetServer - E50 Installation Manual

1 Setting Up the HP NetServer

Setup Steps

The following topics and diagrams provide the most efficient way to set up the
HP NetServer E 200. It is important to follow the setup steps in the exact order
shown below. Skip any steps that do not apply to you. To provide further details,
these steps include references to other sections of this manual and to other
documents.

Preparations

CAUTION
Verify Contents
Save Packaging
Find the
Installation Kit
Support
Documentation
The HP NetServer E 200 weighs approximately 33 lbs. (16
kgs), excluding a keyboard or monitor. Use appropriate lifting
precautions when you move it.
Unpack the contents of the shipping box and locate the
ReadFirst sheet.
Verify the contents of the shipping box (including the
installation kit) against the Contents list included with
your HP NetServer
damaged, call your reseller.
Store the empty boxes and packing material in a safe
place. This is especially important if you plan to ship the
HP NetServer
E 200
HP NetServer
E 200
This kit contains the ReadFirst sheet, the NOS
Installation Guide, and the HP Startup CD-ROM
shipped with each
HP NetServer
E 200
This document describes installation, hardware
upgrades, configuration, and troubleshooting of your
HP NetServer.
If anything is missing or
E 200.
elsewhere for final installation.
Installation Kit
.
HP NetServer
Installation Guide
1