Connecting The Monitor, Keyboard, Mouse, And Ups - HP D6030A - NetServer - E50 Installation Manual

7 Connecting the Monitor, Keyboard,
Mouse, and UPS
Use this chapter to connect the monitor, keyboard, and mouse cables and the AC
power cord to the appropriate connectors on the rear of the chassis. When
connecting the HP NetServer to peripherals, use the cable ties and labels provided
with the product. See Figure 7-1.
If you are using a switch box to connect one monitor, keyboard and mouse to a
number of servers, refer to the instructions provided with the switch box.
Power
Keyboard
Mouse
USB
Not Used
Serial Port A
Parallel Port
Serial Port B
External SCSI
Port
1. If you have an uninterruptible power supply (UPS), install the UPS near
the HP NetServer.
Refer to the instructions supplied with the UPS.
Figure 7-1. Rear Panel Ports
Strain
Relief
Key Lock
Video
SVGA
41