HP D6030A - NetServer - E50 Installation Manual page 9

Chapter 1
Add Memory
Add PCI Boards
Replace the Cover
Setting Up the HP NetServer
Use only HP supported DIMMs.
Supported DIMMs may be installed in any
combination, in any slot.
For details refer to Chapter 5, "Installing Additional
Memory."
The slot assignments of additional disk drive
controller boards may affect boot order.
For details refer to Chapter 6, "Installing
Additional Boards."
Ensure all cables are properly routed and all
components are fully seated.
For details refer to Chapter 3, "Opening and
Closing the HP NetServer."
3