Hp Startup Cd-Rom; Contents Of The Hp Startup Cd-Rom; Accessing The Hp Startup Cd-Rom; Nos Installation - HP D6030A - NetServer - E50 Installation Manual

Chapter 8

HP Startup CD-ROM

The HP Startup CD-ROM provides you with the latest NOS drivers, DiagTools
Utility, BIOS Flash utility, and a diskette creation Utility.
l Run the HP Startup CD-ROM on the HP NetServer to obtain the required
NOS drivers and the DiagTools Utility located on the CD-ROM.
You need to boot the NetServer with the HP Startup CD-ROM inserted
into the CD-ROM drive to access contents of the CD. The CD-ROM
contains the latest NOS drivers (SCSI, IDE, NIC and Video) for the
supported NOSs and the DiagTools Utility.
To Install the NOS drivers on the NetServer, refer to NOS Installation later
in this chapter.

Contents of the HP Startup CD-ROM

The following is a list of items contained on the HP Startup CD-ROM:
Boot file (file containing boot instructions for the NetServer)
NOS directories (Win 2000/NT 4.0 and NetWare 5.x/4.x)
NOS Drivers subdirectories (SCSI, IDE, NIC and Video)
DiagTools Utility
Make Diskette Utility
BIOS Flash Utility

Accessing the HP Startup CD-ROM

The HP Startup CD-ROM provides the instructions for accessing and using the
CD-ROM.

NOS Installation

The instructions for manually installing your specific network operating system
(NOS) and the respective NOS drivers is provided in the HP NetServer E 200
NOS Installation Guide.
NOTE
The DiagTools Utility will start automatically when you boot
the NetServer with the DiagTools disk #1.
44
Configuring the HP NetServer