Changing System Date And Time - HP D6030A - NetServer - E50 Installation Manual

Chapter 8

Changing System Date and Time

Use this topic to change the HP NetServer's date and time and refer to the
following procedure.
1. To reach the Setup Utility, boot or reboot the NetServer and press the
<Del> key when prompted.
2. If necessary, use the left-arrow key to select Main from the menu bar at the
top of the screen.
Once in the Setup Utility, the menu bar appears at the top of the screen
with "Main, Advanced, Power, Boot, and Exit" shown. The Main menu is
the default menu and should be the highlighted selection at the left of the
menu bar when the Setup Utility first opens.
3. If necessary, use the up-arrow key to move to the System Time field.
The "System Time" field is highlighted by default when the "Main" menu
is selected. This field actually consists of three sub-fields enclosed in
brackets [xx:xx:xx]: Hours to the left (24-hour clock), Minutes in the
middle, and Seconds to the right.
4. Use the + or – keys to change the hour and press <Tab> or <Shift> +
<Tab> to move to the minutes field.
5. Use the + or – key to change the minutes and press <Tab> or <Shift> +
<Tab> again to move to the seconds field.
6. Use the + or – key to change the seconds and then use the arrow keys to
leave this field.
7. Scroll to System Date field to enter the system date in the field.
The dates are entered in the "System Date" field in the same way as the
time was entered in the "System Time" field. This field also has three
separate sub-fields for Month, Day, and Year enclosed in brackets
[xx/xx/xxxx]. Use four digits for the year number.
8. Use the + or – key to change month and press <Tab> or <Shift> + <Tab>
to move to the day field.
9. Use the + or – key to change the day and press <Tab> or <Shift> + <Tab>
again to move to the year field.
10. Use the + or – key to change the year and then use the arrow keys to leave
this field.
11. Choose <F10> from the list of options.
A dialog appears asking you to confirm your decision.
48
Configuring the HP NetServer