Table of Contents
Advertisement
2-2 Connecting to the Router via Web Browser
After the network connection is established, the next step is to set
up the router with proper network parameters so it can work
properly in your network environment.
Before you can connect to the router and start the configuration
procedures, your computer must be able to obtain an IP address
automatically (use dynamic IP address). If it's set to use a static IP
address, or if you're unsure, follow the instructions below to
configure your computer to use a dynamic IP address:
If the operating system of your computer is
Windows 95/98/Me
Windows 2000
Windows XP
Windows Vista/7
2-2-1 Windows 95/98/Me IP Address Setup
1. Click Start (at the lower-left corner of your desktop), then click
Control Panel. Double-click the Network icon and the Network
window will appear. Select "TCP/IP," then click "Properties."
- go to section 2-2-1
- go to section 2-2-2
- go to section 2-2-3
- go to section 2-2-4
9
Advertisement
Table of Contents
