Add A New Qos Rule - Intellinet 524681 User Manual

Enable QoS (1):
Total Download
Bandwidth (2):
Total Upload
Bandwidth (3):
Current QoS
Table (4):
Add (5):
Edit (6):
Delete
Selected (7):
Delete All (8):
Move Up (9):
Check this box to enable the QoS function;
de-select this box if you don't want to enforce
QoS bandwidth limitations.
You can set the limit of total download
bandwidth in kbits. To disable the download
bandwidth limitation, enter "0" here.
You can set the limit of total upload
bandwidth in kbits. To disable the upload
bandwidth limitation enter "0" here.
All existing QoS rules will be displayed here.
Click "Add" to add a new QoS rule (see Section
3-1-2 below).
If you want to modify the content of a specific
rule, check the "Select" box of the rule you want
to edit, then click "Edit." Only one rule should
be selected a time! If you didn't select a rule
before clicking "Edit," you'll be prompted to add
a new rule.
You can delete selected rules by clicking this
button. You can select one or more rules to
delete by checking the "Select" boxes of the
rule(s) you want to delete. If the QoS table is
empty, this button will be grayed out and
can not be clicked.
By clicking this button, you can delete all rules
currently in the QoS table. If the QoS table is
empty, this button will be grayed out and
can not be clicked.
You can pull up the priority of the QoS rule you
84