Setup Procedure For Dynamic Ip - Intellinet 524681 User Manual

2-5-2 Setup Procedure for Dynamic IP

Below are descriptions of each option:
Host Name (1):
MAC Address (2): Enter the MAC address of your computer if your
After you finish the settings, click "Apply" (3); to remove any value
you entered, click "Cancel."
After you click "Apply," the following message will be displayed on
your Web browser:
Enter the host name of your computer. This is
optional, and is only required if your service
provider asks you to do so.
service provider only permits computers with
certain MAC addresses Internet access. If
you're using a computer that's used to connect
to the Internet via cable modem, you can simply
click "Clone MAC address" to fill the MAC
Address field with the MAC address of your
computer.
46
1
2
3