Table of Contents
Advertisement
3-3 Firewall
In addition to NAT, this router provides firewall functions to block
malicious intruders from accessing your computers on your local
network. These functions include inbound attack prevention and
blocking of outbound traffic, such as blocking URLs that have
pre-defined keywords.
Click "Firewall" on the left side of the Web management interface,
and the following message will be displayed on your Web browser:
Select "Enable" or "Disable" to enable or disable the firewall
functions of this router, then click "Apply." The following message
will be displayed on your Web browser:
Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
99
Advertisement
Table of Contents
