Table of Contents
Advertisement
Below are descriptions of the options:
Enable Port
Forwarding (1):
Private IP (2):
Computer Name
(3):
Type (4):
Port Range (5):
Comment (6):
Add (7):
Reset (8):
Port Forwarding
Table (9):
Delete (10):
Delete All (11):
Check this box to enable port mapping;
uncheck this box to disable port mapping.
Input the IP address of the computer on the
local network that provides Internet service.
Pull down the menu and all the computers
connected to the router will be listed here. You
can select the computer name without checking
the IP address of the computer.
Select the type of connection: "TCP" or "UDP."
If you're not sure, select "Both."
Input the starting port number in the left field
and input the ending port number in the right
field. If you only want to redirect a single port
number, just enter the port number in the left
field.
Input any text to describe this mapping, up to 16
alphanumerical characters.
Add the mapping to the port forwarding table.
Remove all entered values.
All existing port forwarding mappings will
be displayed here.
Select a port forwarding mapping by clicking the
"Select" box of the mapping, then click "Delete
Selected" to remove the mapping. If there's no
existing mapping, this button will be grayed out.
Delete all mappings in the virtual server table.
90
Advertisement
Table of Contents
