Table of Contents
Advertisement
Below are descriptions of the options:
Fragment
Threshold (1):
RTS Threshold (2): Set the RTS threshold of the wireless radio. Do
Beacon Interval (3): Set the beacon interval of the wireless radio.
DTIM Period (4):
Data Rate (5):
N Data Rate (6):
Channel Width (7): Set the channel width. Do not modify the
Preamble Type (8): Set the type of preamble. Do not modify the
Broadcast ESSID Decide if the wireless router will broadcast its
(9):
Set the threshold of the wireless radio.
Do not modify the default value if you don't
know what it does (default value is 2346).
not modify the default value if you don't
know what it does (default value is 2347).
Do not modify the default value if you don't
know what it does (default value is 100).
Set the DTIM period of the wireless radio. Do
not modify the default value if you don't
know what it does (default value is 3).
Set the wireless data transfer rate to a certain
value. Since most wireless devices will
negotiate with each other and pick a proper
data transfer rate automatically, it's not
necessary to change this value unless you
know what will happen after modification.
Same as above, but only for 802.11n clients.
default value if you don't know what it does
(default setting is "Auto 20/40 MHz").
default value if you don't know what it does
(default setting is "Short Preamble").
own ESSID or not. You can hide the ESSID of
70
Advertisement
Table of Contents
