Table of Contents
Advertisement
Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
3-2-2 Port Forwarding
This function allows you to redirect a single port or consecutive
ports of an Internet IP address to the same port of the IP address
on a local network. The port number(s) of the Internet IP address
and private IP address (the IP address on the local network) must
be the same. If the port numbers of the Internet IP address and
private IP address are different, use the Virtual Server function
described in the next section.
Click "NAT" on the left side of the Web management interface, then
click "Port Forwarding." The following message will be displayed on
your Web browser:
1
2
3
4
6
5
7
8
9
10
11
12
13
89
Advertisement
Table of Contents
