Table of Contents
Advertisement
4. In the Select network Protocol window, select the TCP/IP Protocol and
click "oK" to install the TCP/IP protocol. You may need your Windows Cd
to complete the installation.
5. After you install TCP/IP, go back to the network window. Select TCP/IP
from the list of network Protocols,
then click "Properties."
6. Click on each of the tabs and
verify the following settings:
IP Address: Select "obtain an IP
address from a dHCP server."
DNS: leave all fields blank.
WINS: leave all fields blank.
Routing: leave all fields blank.
7 . Click "oK" to confirm the setting.
Your PC will now obtain an IP
address automatically from your
router's dHCP server.
NOTE: Make sure the router's dHCP
server is the only one available on your
lAn.
5. web mAnAgement
ConfigurAtion
After configuring the PC(s) to obtain the IP address(es) automatically, the router's
dHCP server will automatically give lAn clients an IP address. by default, the router's
dHCP server is enabled so that an IP address can be obtained automatically.
once the PC has obtained an IP address from the router, enter the default IP
The login screen will appear. enter the
username and password, then click "oK"
to login. by default, the username is
"admin" and the password is "1234."
NOTE: For security reasons, it is
recommended that the password be
changed as soon as possible.
Click "oK" to continue.
address
192.168.2.1
PC's Web browser
and press "enter."
Web MAnAGeMenT ConFIGURATIon
INTELLINET NETWORK SOLUTIONS MIMO Wireless Turbo G USB Adapter
(the router's IP address) into the
11
Advertisement
Table of Contents
