Below are descriptions of the options:
WPA Unicast
Cipher Suite (2):
RADIUS Server
IP address (3):
RADIUS Server
Port (4):
RADIUS Server
Password (5):
After you finish the settings, click "Apply" (6) and the following
message will be displayed on your Web browser:
Click "Continue" to go back and continue with the router setup
procedure, or click "Apply" to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
Select a type of WPA cipher suite. Options are
"WPA (TKIP)," "WPA2 (AES)" and "WPA2
Mixed." You can select any one of them, but
you have to make sure your wireless client
supports the cipher you selected.
Enter the IP address of your RADIUS
authentication server here.
Enter the port number of your RADIUS
authentication server here. Default is 1812.
Enter the password for your RADIUS
authentication server here.
77
1
2
3
4
5
6