Table of Contents
Advertisement
Verify Password (5): Enter the password again for confirmation.
Service (6):
AT Dial Script (7): Enter the dialed number for your UMTS or
After you finish the settings, click "Apply" (8); to remove any value
you entered, click "Cancel."
After you click "Apply," the following message will be displayed on
your Web browser:
Click "Continue" to go back and continue with the router setup, or
click "Apply" to reboot the router so the settings will take effect.
(Wait for about 30 seconds while router is rebooting.)
Select your card type from the drop-down
menu.
HSDPA connection. The default is *99#. This
field should not be altered except when
required by your service provider.
45
Advertisement
Table of Contents
