Displaying Lldp-Dcbx Information; Displaying Dcb Interface Statistics; Configuring A Dcb Interface From The Switch View - Brocade Communications Systems SN3000B Administrator's Manual

18

Displaying LLDP-DCBX information

Displaying LLDP-DCBX information

To display LLDP-DCBX information, perform the following steps.
1. Select the DCB tab on the Switch Administration panel.
2. Select the LLDP-DCBX tab.

Displaying DCB interface statistics

The DCB interface Port Statistics tab displays basic and advanced statistics, and allows you to
change statistics collection parameters.
The DCB Interface Statistics Configuration section allows you to do the following:
•
•
•
To view additional information, select Show Advanced Mode. An Advanced tab and an Error Detail
tab are added next to Basic Mode.
The Advanced tab displays DCB transmission statistics, and the Error Details tab displays
transmission error statistics.
To display DCB interface statistics, perform the following steps.
1. Select the DCB Interfaces tab on the Port Administration panel.
2. Under the DCB Interface Explorer, select a port.
3. Select the Port Statistics tab.

Configuring a DCB interface from the Switch View

DCB interfaces can be enabled and disabled from a right-click menu on the Switch View.
To enable or disable a DCB interface from the Switch View, perform the following steps.
1. Right-click the port to display the right-click menu.
2. Select Configure to display the Enable and Disable options.
240
•
To display global settings, select the Global tab.
•
To display LLDP profile information, select the LLDP Profile tab.
Toggle between showing Absolute Values or Delta Values (values that have changed since the
last data collection).
Use the Clear Counters button to clear the counters in port statistics.
Change the retrieval interval.
Web Tools Adminstrator's Guide
53-1002152-01