Figure 17 Fc Explorer Dialog; Figure 18 Port Octet Speed Combination Dialog; Table 10 Port Octet Speed Combinations - Brocade Communications Systems SN3000B Administrator's Manual

6
Configuring Port Octet Speed Combination
The ports on these hardware models are segregated into 8 port octets. The Port Octet Speed
Combination is applied to the eight ports to which the selected port belongs. Based on this Port
Octet Speed combination, the speed options will be available in the Edit Configuration Dialog.
TABLE 10
Port Octet in Combination
1
2
3
You can change the octet combination for the octet associated with first eight ports of a blade or
switch. The first eight ports are based on the slot port number (or user port number in case of the
Brocade 6510). The octet speed must be set consistently across all members of the port octet.
NOTE
Changing from one combination to another is disruptive operation. It may cause connected ports to
become No_Sync. The 10 GE license is required in order to set a port to speed 10G.
To configure the Port Octet Speed Combination, perform the following steps.
1. Select Port Admin > Advanced mode.
2. Select the FC Ports tab.
3. In the FC Ports Explorer, select a port to configure.
4. Click Speed Combination.
5. Select a Speed Combination and click OK.
94
Port octet speed combinations
Available port speeds within the Octet
ASN or Fixed 16G|8G|4G|2G
ASN or Fixed 8G|4G|2G, Fixed 10G
Auto or Fixed 10G, Auto or Fixed 16G
FIGURE 17
FC Explorer dialog
The Port Octet Speed Combination dialog displays.
FIGURE 18 Port Octet Speed Combination dialog
Web Tools Adminstrator's Guide
53-1002152-01