Right-Click Options; Refresh Rates; Figure 7 Right-Click Menu For Ports (From Switch Explorer) - Brocade Communications Systems SN3000B Administrator's Manual

Brocade web tools administrator's guide - supporting fabric os v7.0.0 (53-1002152-01, march 2012)
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

Right-click options

You can right-click a port to quickly perform some basic port administration tasks, as shown in
Figure
FIGURE 7
The tasks are:

Refresh rates

Different panels of Web Tools refresh at different rates.
The refresh, or polling, rates listed in this section and throughout the book indicate the time
between the end of one polling period and the start of the next, and not how often the screen is
refreshed. A refresh rate of 15 seconds does not ensure that a refresh occurs every 15 seconds. It
ensures that the time between each refresh activity is no more than 15 seconds.
Autorefresh intervals might be not be exactly 15 seconds. The refresh rate varies depending on the
activity in the fabric and on the host system you are using. Following are some variables you should
consider when refreshing the fabric:
Web Tools Adminstrator's Guide
53-1002152-01
port status (online or offline)
port state (in-sync, no_sync, no light, or no module)
7.
Right-click menu for ports (from Switch Explorer)
The Port Admin option displays the Port Administration window.
The Port Details option displays read-only information about a port, without opening the Port
Administration window. You can right-click on the table content to export or copy the
information from the Port Details window.
The Configure option provides another menu of options to allow you to rename, enable, and
disable ports, and to set persistent enable or disable without opening the Port Administration
window.
Retrieval time increases when you are in a large fabric because there is more data to retrieve
from the switches.
Processor speed of the system you are using may slow down the refresh rate.
OS-Job Scheduling if you are using a host-system in the data center impacts the refresh rate.
JVM-Performance can contribute to causing interval differences between what is on-screen
and how long it is actually taking.

Right-click options

27
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Web tools

Table of Contents