Setting Up The Library; Rolling The Library Down The Ramp - HP StorageWorks ESL E Series Unpacking And Installation Manual

CAUTION:
Be aware that the laptop tray may open up during this process. If so,
return it to the closed position before continuing.

Setting up the library

1.
Stabilize the library by lowering the leveling feet:
a.
Rotate each foot of the library until it makes contact with the floor.
b.
Rotate each foot an additional 1/4 turn to begin raising the library.
c.
Level the library using a carpenter's level.
2.
Remove the antistatic bag covering the library.
3. Remove the shipping foam from around the bottom perimeter of the library (see
Figure
28
Unpacking the library
Figure 12 Rolling the library down the ramp
13).