Collecting The Trace Log; Creating Initialization Parameters - HP StorageWorks P9000 Software Installation Manual

3. Enable basic access authentication.
a. Execute the htpasswd command to set up a user ID and password for authenticating
P9000 Replication Manager.
After executing the htpasswd command, a file that manages the user ID and password
for basic access authentication of the P9000 Replication Manager will be created. For
details on valid user IDs and passwords, refer to the product information on the IBM
WebSphere Application Server Information Center.
The following is an execution example of the htpasswd command:
htpasswd /usr/local/apache/.htaccess user-name
b. See
httpd.conf file.
Table 28 Required Settings for the .conf File to Set Up Authentication
Directives
AuthName
AuthType
AuthUserFile
Require
4. Restrict access to the TCP/IP port used by the Business Continuity Manager agent.
IBM HTTP Server is the only program that can communicate with the Business Continuity
Manager agent. For details on how to configure communication between the two, see the
Communications Server IP Configuration Reference.

Collecting the Trace Log

To collect error logs and access logs between P9000 Replication Manager and IBM HTTP Server,
use the log function of the latter.
To determine whether to collect logs of IBM HTTP Server, follow the instructions from the web
administrator. Note that, if you do not collect logs, it might be difficult to determine the cause of
an error.

Creating Initialization Parameters

This section describes how to create the initialization parameters for setting up the environment
required to start Business Continuity Manager agent. YKPRM00 is a member of the initialization
parameter samples registered in the sample library during initialization. Adjust the parameters to
fit your environment.
Create a dataset to hold the initialization parameters by specifying the following attributes:
LRECL: 80
BLKSIZE: Multiple of 80
RECFM: Fixed-length or blocked fixed-length record
DSORG: Sequential or partitioned dataset
"Required Settings for the .conf File to Set Up Authentication" (page 65)
Values
Specify the realm that will be used for authentication.
Specify the type of user authentication.
Specify Basic.
Specify the location of the management file for the
user ID and password created by the htpasswd
command.
Specify the users that are allowed access.
Creating Initialization Parameters
to edit the
65