Installing Business Continuity Manager; Overview Of Installation; Preparing For Installation; Types Of Distribution Media - HP StorageWorks P9000 Software Installation Manual

2 Installing Business Continuity Manager

This chapter provides installation preparations and procedures, environment setup procedures,
and version upgrade procedures.
"Preparing for Installation" (page 14)
"Installing Business Continuity Manager" (page 22)
"Upgrading Business Continuity Manager" (page 46)

Overview of installation

The following figure provides an overview of how to install Business Continuity Manager.
Figure 2 Overview of the Business Continuity Manager installation procedure
To upgrade Business Continuity Manager, see
46).

Preparing for Installation

The sections below describe the preparations required for installing Business Continuity Manager.
There are two ways to install Business Continuity Manager.
Using SMP/E standard commands (RECEIVE, APPLY, and ACCEPT) for installation
Installation without using SMP/E (simple installation)
Before upgrading Business Continuity Manager, see
(page 46).

Types of distribution media

Business Continuity Manager is available through both of the following distribution media:
Tape
CD-ROM
In tape-based distribution, the standard label format is used. The volume serial number is HPQYK.

Provided datasets

Table 5 (page 15)
16) lists the files that are provided on the installation CD-ROM.
14 Installing Business Continuity Manager
lists the datasets that are provided on the SMP/E installation tape.
"Upgrading Business Continuity Manager" (page
"Upgrading Business Continuity Manager"
Table 6 (page