Cr_Security Command; Cr_Keydis Command; Cr_Pjlocknow Command; Cr_Pjlockmenu Command - Sanyo PLC-XU300A - 3000 Lumens Manual

PLC-XU300/350 Expand Serial Command Functional Specifications
%a
Unacceptable

9.11.16 CR_SECURITY Command

Command "CR_SECURITY" [CR]
Details Get Security Mode setting status
Acceptable
Response %1
Unacceptable

9.11.17 CR_KEYDIS Command

Command "CR_KEYDIS"(CR)
Details Get disablility status of RC/Projector keys (valid or invalid)
Acceptable
Response %a
Unacceptable

9.11.18 CR_PJLOCKNOW Command

Command "CR_PJLOCKNOW" [CR]
Details Get if PJ lock is actually in operation
Acceptable
Response %1
Unacceptable

9.11.19 CR_PJLOCKMENU Command

Command "CR_PJLOCKMENU" [CR]
Details Get status of PJ Lock on Menu
Acceptable
Response %1
Unacceptable

9.11.20 CR_FANMODE Command

Command "CR_FANMODE"[CR]
Details Get selected Fan mode
Response Acceptable
"001" --------------------------- Code1 is selected
"002" --------------------------- Code2 is selected
"Error Code" [CR]
"000_%1[CR]
"ON" ------------- PJ Lock setting on Menu is ON-1 or ON-2
"OFF" ------------PJ Lock setting on Menu is OFF
"Error Code" [CR]
"000_%a"[CR]
"NONE" -------------------------- RC / Projector keys are valid
"RC" ------------------------------ RC keys are invalid
"KEY" ----------------------------- Projector keys are invalid
"Error Code" [CR]
"000_%1[CR]
"LOCK" ------------- PJ Lock is in operation. PJ Lock status is ON-1
or ON-2 on Menu, and PJ PIN CODE is not
entered so that projector is actually locked.
"FREE" ------------- PJ Lock is released. PJ Lock status is OFF, or,
status is ON-1 or ON-2 on Menu but PJ PIN
CODE is entered correctly so that PJ Lock is
released.
"Error Code" [CR]
"000_%1[CR]
"ON1" ------------- PJ Lock status is On-1
"ON2" ------------- PJ Lock status is On-2
"OFF" ------------- PJ Lock status is OFF
"Error Code" [CR]
"000_%a"[CR]
60 / 66