Overview; Serial Interface Specification; Transfer Specification; Connection - Sanyo PLC-XU300A - 3000 Lumens Manual

PLC-XU300/350 Expand Serial Command Functional Specifications
1.

Overview

1.1 This Functional Specification defines communication functions for PLC-XU300/350.
1.2 Compatible to Firmware Ver. 1.x of the projector.
1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the
commands are defined as Expand Serial Commands.
2.

Serial Interface Specification

2.1 Transfer Specification

Item
Synchronous System
Transmission Speed
Data Length
Parity
Stop Bit
Flow Control
Note1) Transmission Speed: initial setting value is 19200
Note2) Transmission Speed can be changed in service mode.

2.2 Connection

Dedicated serial cable must be used for a connection to a computer and a projector.
Asynchronous
9600 / 19200
8 bit
N/A
1
N/A
PC
COM 1
(D-Sub 9 Pin)
7 / 66
Specification
Projector
Control Port
ÿ D-Sub 9 Pinÿ