Cr_Coltemp Command; Cr_Nzred Command; Cr_Progv Command; Cr_Image Command - Sanyo PLC-XU300A - 3000 Lumens Manual

Expand serial command functional specifications
Hide thumbs Also See for PLC-XU300A - 3000 Lumens:
Table of Contents

Advertisement

PLC-XU300/350 Expand Serial Command Functional Specifications

9.4.10 CR_COLTEMP Command

Command
"CR_COLTEMP"[CR]
Details
Get Color Temp. setting value
Acceptable
Response
%a
Unacceptable

9.4.11 CR_NZRED Command

Command
"CR_NZRED"[CR]
Details
Get setting status of Noise Reduction
Acceptable
Response
%1
Unacceptable

9.4.12 CR_PROGV Command

Command
"CR_PROGV"[CR]
Details
Get setting status of Progressive scan
Acceptable
Response
%a
Unacceptable

9.4.13 CR_IMAGE Command

Command
"CR_IMAGE"[CR]
Get image setting status
Details
Required data "CUSTOM1" to "CUSTOM4" is the same as "Image1" to "Image4"
displayed when selecting IMAGE on OSD menu
Acceptable
%a
Response
Unacceptable
"000_%a"[CR]
"000" ------------------------------ Xlow
"001" ------------------------------ Low
"002" ------------------------------ Mid
"003" ------------------------------ High
"BLACK" -------------------- Blackboard(Green) mode selected
"COLOR" ------------------- Colorboard selected
"BLANK" -------------------- White Balance has been changed
"Error Code"[CR]
"000_%1"[CR]
"L1" -------- Noise Reduction for moving image
"L2" -------- Noise Reduction for still image
"OFF" ----- Noise Reduction is OFF
"Error Code"[CR]
"000_%a"[CR]
"L1" ----------------- Progressive Mode L1 is selected
"L2" ----------------- Progressive Mode L2 is selected
"FILM" -------------- Progressive Model FILM is selected
"OFF" --------------- Progressive scan is disabled
"Error Code"[CR]
"000_%a"[CR]
"DYNAMIC" --------------------------------------- Dynamic
"STAND" ------------------------------------------- Standard
"REAL" --------------------------------------------- Real
"CINEMA" ----------------------------------------- Cinema
"BLACKBOARD" -------------------------------- Blackboard
"COLORBOARD" -------------------------------- Colorboard
"CUSTOM1"~"CUSTOM4" -------------------- Image1~4
"Error Code"[CR] ---- When the command is invalid due to
condition such as Input source
44 / 66

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xu350a - 3500Plc-xu300Plc-xu350

Table of Contents