Lamp Command Table; Sound Command Table; Setting Command Table; Other Command Table - Sanyo PLC-XU300A - 3000 Lumens Manual

PLC-XU300/350 Expand Serial Command Functional Specifications

5.5 Lamp Command Table

Execute command
CF_LAMPMODE_%1[CR]
CF_LAMPLIFECONTRL_%1[CR]

5.6 Sound Command Table

Execute command
CF_VOLUME_%1[CR]
CF_MUTE_%1[CR]

5.7 Setting Command Table

Execute command
CF_LANG_%1[CR]
CF_MENUPOSITION_%1[CR]
CF_AUTOSETUPPCADJ_%1 [CR]
CF_AUTOSETUPKEYSTONE_%1 [CR]
CF_INPUTSEARCH_%1[CR]
CF_AUTOSETUP_%1[CR]
CF_BACKGND_%1[CR]
CF_DISP_%1[CR]
CF_LOGO_%1_%2[CR]
CF_CEIL_%1[CR]
CF_REAR_%1[CR]
CF_TERMINAL_%1[CR]
CF_STANDBYMODE_%1[CR]
CF_P-MANE_%1[CR]
CF_P-MANETIME_%1[CR]
CF_ON-STA_%1[CR]
CF_RCODE_%1[CR]
CF_KEYDIS_%1[CR]
CF_PJPINCODE_%1[CR]
CF_FANMODE_%1[CR]
CF_FANCONTROL_%1[CR]
CF_CCAPTIONDISP_%1[CR]
CF_CCAPTIONCOLOR_%1[CR]
CF_FILTIMER_%1[CR]
CF_FILH_%1[CR]
CF_FDEFAULT_%1[CR]

5.8 Other Command Table

Execute command
CF_KEYEMU_%1[CR]
CF_MENU_%1[CR]
CF_POWER_%1[CR]
CF_FREEZE _%1[CR]
CF_VMUTE _%1[CR]
CF_PTIMER _%1[CR]
Item
Select Lamp mode
Select Lamp life mode
Item
Set Volume value
Control ON/OFF of Sound Mute
Select language for OSD
Move menu position.
Set Auto PC in Auto Setup
Set Auto Keystone in Auto Setup
Set up Input search function
Excute Auto Setup
Set screen mode for the case of no signal
Set Display function
Set Logo function
Set Ceiling function
Set Rear function
Set Terminal function
Set Standby Mode
Set Power management function
Set Power management time
Set Power ON Start function
Select Remote Control Reception Code
Disable RC/Projector keys
Input PIN code to release PJ Locj
Select Fan mode
Select Fan control mode
Set channel of Closed caption
Set color of Closed caption
Set time when Filter warning OSD is displayed
Reset Filter used time
Set the value to Factory Default
Item
Behave the same as corresponding key of
projector top panel
Switch ON/OFF of each Menu.
Switch ON/OFF of Power.
Set Freezefunction.
Set No show function.
Set P-Timer function.
10 / 66
Item