Cr_Shuth Command; Cr_Security Command; Cr_Pjlocknow Command; Cr_Pjlocmenu Command - Sanyo PLC-XF1000 - 12000 Lumens Manual

PLC-XF1000 Expand Serial Command Functional Specifications

9.10.15 CR_SHUTH Command

Command "CR_SHUTH" [CR]
Details Get time setting to start the shutter management
Acceptable
Response
%1
Unacceptable

9.10.16 CR_SECURITY Command

Command "CR_ SECURITY" [CR]
Details Get ON/OFF setting status of Security on menu.
Acceptable
Response
%1
Unacceptable

9.10.17 CR_PJLOCKNOW Command

Command "CR_PJLOCKNOW" [CR]
Details Get actual setting status of PIN code lock
Acceptable
Response
%1
Unacceptable

9.10.18 CR_PJLOCMENU Command

Command "CR_PJLOCKMENU" [CR]
Details Get ON/OFF setting status of PIN code lock on menu
Acceptable
Response
%1
Unacceptable

9.10.19 CR_FILH Command

Command "CR_FILH" [CR]
Details Get Filter used time
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"005" -------------------- 5 minutes
"006" -------------------- 6 minutes
:
"179" -------------------- 179 minutes
"180" -------------------- 180 minutes
"?" [CR]
"000_%1" [CR]
"ON" ------------ PJ is locked
"OFF" ----------- PJ is not locked.
"Error Code" [CR]
"000_%1" [CR]
"LOCK" ------ PJ is locked
PIN code lock is set to ON1/ON2 on the menu and PJ PIN code is
not entered, therefore PJ is actually locked.
"FREE" ------- PJ is unlocked (either A or B)
A) PJ lock is set to OFF on the menu
B) PJ lock is set to ON1/ON2 on the menu, but PIN code Lock
mode is canceled because PJ PIN code is entered.
"Error Code" [CR]
"000_%1" [CR]
"ON1" -------------------- PIN code lock ON 1 is set on the menu
"ON2" -------------------- PIN code lock ON 2 is set on the menu
"OFF" -------------------- PIN code lock OFF is set on the menu
"Error Code" [CR]
"000_%1" [CR]
"00000 - 99999"
"Error Code" [CR]
64/72