Cr_Hdmisound Command; Cr_Security Command; Cr_Pjlocknow Command; Cr_Pjlockmenu Command - Sanyo PLC-WTC500AL - 5000 Lumens Manual

PLC-WTC500L Expand Serial Command Functional Specifications

9.11.23 CR_HDMISOUND Command

Command "CR_HDMISOUND" [CR]
Details Get setting status of HDMI setup – Sound.
Acceptable
Response
Unacceptable

9.11.24 CR_SECURITY Command

Command "CR_ SECURITY" [CR]
Details Get ON/OFF setting status of Security on menu.
Acceptable
Response %1
Unacceptable

9.11.25 CR_PJLOCKNOW Command

Command "CR_PJLOCKNOW" [CR]
Details Get actual setting status of PIN code lock
Acceptable
Response %1
Unacceptable

9.11.26 CR_PJLOCKMENU Command

Command "CR_PJLOCKMENU" [CR]
Details Get ON/OFF setting status of PIN code lock on menu
Acceptable
Response %1
Unacceptable

9.11.27 CR_KEYDIS Command

Command "CR_KEYDIS" [CR]
Details Get RC/Control key prohibit status (valid or invalid)
Acceptable
Response %1
Unacceptable
"000_%1" [CR]
"HDMI" ----------------- PCM input(Digital sound) is selected
%1
"EXTERNAL" --------- External sound input is selected
"Error Code" [CR]
"000_%1" [CR]
"ON" ---------------- PJ Lock is set to On1/ On2 on the menu
"OFF" --------------- PJ Lock is set to OFF on the menu
"Error Code" [CR]
"000_%1" [CR]
"LOCK" ------ PJ is locked
PIN code lock is set to ON1/ON2 on the menu and PJ PIN
code is not entered, therefore PJ is actually locked.
"FREE" ------- PJ is unlocked (either A or B)
A) PJ lock is set to OFF on the menu
B) PJ lock is set to ON1/ON2 on the menu, but PIN code
Lock mode is canceled because PJ PIN code is entered.
"Error Code" [CR]
"000_%1" [CR]
"ON1" -------------------- PIN code lock ON 1 is set on the menu
"ON2" -------------------- PIN code lock ON 2 is set on the menu
"OFF" -------------------- PIN code lock OFF is set on the menu
"Error Code" [CR]
"000_%1" [CR]
"NONE" -------------------------- RC&Control keys are valid
"RCALL" ------------------------- All RC keys are invalid
"RCPART" ----------------------- Specific RC keys are invalid
"KEYALL" ------------------------ All Projector Keys are invalid
"KEYPART" ------------------- Specific Projector Keys are invalid
"Error Code" [CR]
70/75