Screen Control Command; Cf_Screen Command; Cf_Dzcent Command; Cf_Keystone Command - Sanyo PLC-XU300A - 3000 Lumens Manual

PLC-XU300/350 Expand Serial Command Functional Specifications

8.7 Screen Control Command

8.7.1

CF_SCREEN Command

Command "CF_SCREEN_%1"[CR]
Input is
Computer
%1
Input is
Video
Select image size on screen.
When Input specified by %1 is inappropriate for selected Input, the projector
returns "101" [CR] and the command is not executed.
Details "DZOOM UP" and "DZOOM DN" start effecting from the first command.
This command is available in normal Power ON status.
Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered,
the signal recognized as Video Input.
Acceptable
Response
Unacceptable
8.7.2

CF_DZCENT Command

Command "CF_DZCENT_%1"[CR]
%1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER")
Cancel Digital Zoom
When image is expanded or shrunk, reset its value.
Details
This command is available in normal Power ON status and when Input is
Computer.
Acceptable
Response
Unacceptable
8.7.3

CF_KEYSTONE Command

Command "CF_KEYSTONE_%1"[CR]
"UP" ------------- Correct Keystone distortion to reduce upper part of image
"FUP" ----------- Correct Keystone distortion to reduce upper part by 2steps
%1 "DN" ------------- Correct Keystone distortion to reduce lower part of image
"FDN" ----------- Correct Keystone distortion to reduce lower part by 2steps
"RST" ------------ Set Keystone OFF
Change Keystone distortion correction
Details
This command is available in normal Power ON status.
"NORMAL" ---------------------- Select Normal size
"TRUE" -------------------------- Select True size
"WIDE" -------------------------- Select Wide size
"FULL" --------------------------- Select Full screen size
"CUSTOM" ---------------------- Select Custom size
"DZOOM_UP" ----------------- Expand image size with Digital Zoom
"DZOOM_DN" ----------------- Reduce image size with Digital Zoom
"UP" ------------------------------ Switch selectable screen size in
(Normal → True → Wide → Full → Custom → Normal)
"DN" -------------------------------
(Normal →Custom → Full → Wide→ True → Normalÿ
"NORMAL" ---------------------- Select Normal mode
"WIDE" --------------------------- Select Wide mode
"CUSTOM" ---------------------- Select Custom size
"UP" ------------------------------Switch selectable screen size in
(Normal →Wide →Custom → Normal)
"DN" -------------------------------Switch selectable screen size in
(Normal →Custom → Wide →Normal)
"000"[CR]
"Error Code"[CR]
"000"[CR]
"101"[CR] ------ when Input for Video is selected
27 / 66
positive order
Switch selectable screen size in
negative order
positive order
negative order