Table of Contents
Advertisement
12. Secure the mezzanine card to the standoffs with the four screws previously removed (see letter
E in
Figure
21).
13. Reinstall the top cover. For instructions, see
14. Reinstall the server compute module in the chassis. For instructions, see
Module into the Chassis
Removing a Mezzanine Card
To remove a mezzanine card, follow these steps:
1. Observe the safety and ESD information at the beginning of this manual and in the appendices.
2. If the compute module is installed in a chassis, remove it. For instructions, see
Compute Module from the Chassis
3. Remove the top cover. For instructions, see
4. Locate the mezzanine card.
5. Using a Phillips* screwdriver, remove the four screws securing the mezzanine card to the
standoffs.
®
Intel
Compute Module MFS2600KI User Guide
Figure 21. Securing the Mezzanine Card
Installing the Top Cover
on Page 8.
on page 20.
Removing the Top Cover
Figure 22. Removing a Mezzanine Card
Hardware Installations and Upgrades
on Page
9.
Installing a Compute
Removing a
on Page 8.
19
Advertisement
Table of Contents
