Modify Static Unicast Address - Allied Telesis AT-GS950/8 User Manual

Chapter 15: MAC Address Table

Modify Static Unicast Address

218
To modify the port assignment of a unicast MAC address in the MAC
address table, perform the following procedure:
1. From the main menu on the left side of the page, select the Bridge
folder.
2. From the Bridge folder, select Static Unicast.
The Static Unicast Address Table Page is displayed. See Figure 81 on
page 216.
3. Select Modify next to the static MAC address that you want to change.
The Modify Static Unicast Address Page is displayed (not shown
here).
4. In the Group Member row, select the check boxes for the ports that
you want to include or remove in the Group Member area. Selected
ports are indicated with a check mark.
Note
To restore the original group member ports, click Restore.
5. Click Apply.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.