Policy; Create Policy; Figure 74. Create Policy Page - Allied Telesis AT-GS950/8 User Manual

Chapter 13: Access Control Configuration

Policy

Create Policy

198
The Create Policy page allows you to specify the filtering criteria for one
policy. Before creating a policy, you must pre-define the following indexes:
Classifier Index - See "Create Classifier" on page 178 for more
information.
In-Profile Action Index - See "Create In-Profile Action" on
page 187 for more information.
Out-Profile Action Index - See "Create Out-Profile Action" on
page 191 for more information.
Port List Index - See "Create Port List" on page 195 for more
information.
You can create, modify or delete a Policy by following the procedures in
the following sections:
"Create Policy," next

"Modify Policy" on page 200

"Delete Policy" on page 201

To create an Policy, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy.
The Create Policy page is displayed in Figure 74.

Figure 74. Create Policy Page