Out-Profile Action; Create Out-Profile Action; Figure 68. Create Out-Profile Action Page - Allied Telesis AT-GS950/8 User Manual

Out-Profile Action

Create Out-
Profile Action
The Create Out-Profile Action page allows you to specify a Profile Action's
Permit or Deny privilege and bandwidth restrictions for packets in the
egress queue.
You can create, modify or delete an Out-Profile Action by following the
procedures in the following sections:
"Create Out-Profile Action," next

"Modify Out-Profile Action" on page 193

"Delete In-Profile Action" on page 190

To create a Out-Profile Action, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Out-Profile Action.
The Create Out-Profile Action page is displayed in Figure 68.

Figure 68. Create Out-Profile Action Page

3. Enter a number in the Out-Profile Action Index field.
The Index must be a unique number within the range of 1 - 65535. This
field is mandatory.
Note
The Out-Profile Action Index is a required parameter when you
create a Policy. See "Create Policy" on page 198 for more
information.
AT-GS950/8 Web Interface User Guide
191